RSH-10: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
|succeeded= [[2001SRN]]
|succeeded= [[2001SRN]]
|manual= https://www.thesirenboard.com/manuals/rsh10.pdf
|manual= https://www.thesirenboard.com/manuals/rsh10.pdf
|ports= 12
}}
}}


The RSH-10, also known as the Thunderbeam, was a rotating electromechanical siren produced by [[Federal Signal Corporation]]. RSH stands for Rotating Single-Tone High. Its unusual design consists of a hornless [[STH-10]] mounted at the top with a slanted disc in a cage below. The housing directs sound downward from the rotor and stator, onto the disc. The disc is rotated using a gear reduction off of the rotor shaft, directing the sound in different directions.
The RSH-10, also known as the Thunderbeam, was a rotating electromechanical siren produced by [[Federal Signal Corporation]]. RSH stands for Rotating Single-Tone High. Its unusual design consists of a hornless [[STH-10]] mounted at the top with a slanted disc in a cage below. The housing directs sound downward from the rotor and stator, onto the disc. The disc is rotated using a gear reduction off of the rotor shaft, directing the sound in different directions.
[[Category:Rotating Sirens]] [[Category:Electromechanical Sirens]] [[Category:Federal Signal Corporation]][[Category:Single Toned Sirens]][[Category:Sirens]]
[[Category:Rotating Sirens]] [[Category:Electromechanical Sirens]] [[Category:Federal Signal Corporation]][[Category:Single Toned Sirens]][[Category:Sirens]]

Revision as of 01:28, 16 October 2017

RSH-10
Company Federal Signal Corporation
Type Electromechanical
Sound output 128 dBc at 100 feet
Succeeded by 2001SRN
Documentation Manual


The RSH-10, also known as the Thunderbeam, was a rotating electromechanical siren produced by Federal Signal Corporation. RSH stands for Rotating Single-Tone High. Its unusual design consists of a hornless STH-10 mounted at the top with a slanted disc in a cage below. The housing directs sound downward from the rotor and stator, onto the disc. The disc is rotated using a gear reduction off of the rotor shaft, directing the sound in different directions.